Product ID:ROSIN FLUX CORED SOLDER WIRES, WRP, WRMAP, WRAP.
MSDS Date:03/31/1997
FSC:NIIN:Submitter:D DG
Status Code:A
MSDS Number: CKRHL

FRY METALS

4100 SIXTH AVE
ALTOONA, PA 16602
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 814-946-1611

Preparer: JOHN LAUGHLIN

Cage: JO372

FRY METALS

ALTOONA, PA 16602 US

Telephone: 814-946-1611

Cage: JO372

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

LEAD (SARA 313) (CERCLA)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.05 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILVER (SARA 313) (CERCLA)

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

ANTIMONY (SARA 313) (CERCLA)

CAS: 7440-36-0

RTECS: CC4025000

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ROSIN ACID; (ROSIN)

CAS: 8050-09-7

EXPOS TO LEAD MAY RSLT IN INJURY TO DEVEL FETUS.

RTECS: 9999999ZZ

HLTH HAZ DATA APPLIES ONLY IF

RTECS: 9999999ZZ

TRACE LEVELS. LEAD APPEARS ON THE NAVY OCCUP CHEM

RTECS: 9999999ZZ

PROFESSIONALS CONCERNING LATEST HAZARD LIST

RTECS: 9999999ZZ

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Health Hazards Acute and Chronic:EYES: ROSIN FUMES DURING SOLDERING CAN
BE IRRITATING. MOLTEN ROSIN CORE FLUX WILL CAUSE BURNS. SKIN CONT:
MOLTEN SOLDER WILL CAUSE BURNS. PRLNG EXPOS TO ROSIN FUMES MAY
CAUSE IRRITATION. INGESTION: LE AD IS TOXIC & CUMULATIVE, AFFECTING
KIDNEYS & CNS. TIN IS NOT REGARDED AS TOXIC BUT EXCESSIVE EXOSURE
CAN CAUSE FEVER, NAUSEA, STOMACH CRAMPS OR DIARRHEA. ANTIMONY IS
TOXIC, DUST/FUMES CAN CAUSE NASAL SEPTAL ULCERATION & STOMACH
LINING IRRITATION. ALLOYED SILVER IS UNLIKELY TO BE HAZARDOUS.
INHALATION: ROSIN SMOKE MAY CAUSE IRRITATION, HEADACHE & ALLERGIC
REACTIONS..
Explanation of Carcinogenicity:ANTIMONY TRIOXIDE: ACGIH: LUNG CANCER
(A2); LEAD/LEAD COMPOUNDS: ACGIH (A3), NTP (B), IARC (2B).
Effects of Overexposure:ROSIN CORE FUMES: IRRITATION, ALLERGIC REACTION
(RASH). LEAD: CNS EFFECTS, ANEMIA, INSOMNIA, WEAK, IRRITABILITY,
CONSTIPATION & STOMACHE PAINS. TIN:FEVER, NAUS, STOMACHE
CRAMPS/DIARR. ANTIMONY: DUST/F UME CAN CAUSE NASAL SEPTAL
ULCERATION & STOMACHE LINING IRRITATION
Medical Cond Aggravated by Exposure:CHEMICAL HYPERSENSITIVITY AND
DISEASES OF THE LUNGS.

First Aid:EYES: FOR FUME IRRITATION, REMOVE FROM EXPOSURE. FLUSH EYES
WITH WATER FOR AT LEAST 15 MINUTES. SKIN: FOR BURNS, COOL WITH COLD
WATER AND GET MEDICAL TREATMENT. INGESTION: GET MEDICAL HELP
IMMEDIATELY . NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS
PERSON. INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
ADMINISTER OXYGEN AND GET MEDICAL ATTENTION.

Extinguishing Media:NOT APPLICABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS TOXIC FUMES.

Spill Release Procedures:IF MOLTEN, ALLOW TO COOL AND SOLIFIDY, THEN
SCRAPE UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS. NO FOOD,
DRINK OR TOBACCO SHOULD BE ALLOWED WHERE CORE SOLDER IS USED.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. FOR INDUSTRIAL USE
ONLY. DO NOT TAKE INTERNALLY.

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED. USE
NIOSH APPROVED RESPIRATOR FOR EITHER ORGANIC VAPORS, DUST/FUME
(HIGH EFFICIENCY FILTERS) OR BOTH IF TLV'S ARE EXCEEDED.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO MAINTAIN EXPOSURE LEVELS
BELOW TLV'S.
Protective Gloves:IMPERVIOUS WELDING GLOVES
Eye Protection:FACE SHIELD OR GOGGLES DURING SOLDERING.
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING CORE
SOLDER AND BEFORE EATING, DRINKING OR SMOKING, OR APPLYING
COSMETICS.
Supplemental Safety and Health
HEALTH HAZARDS APPLY ONLY DURING SOLDERING.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:VARIES
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GREY WIRE, VARIOUS SHAPES AND SIZES; NO ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, STRONG ACIDS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THE FUMES EMITTED IN A SOLDERING
OPERATION MAY CONTAIN FORMALDEHYDE, CARBON MONOXIDE, ROSIN
DERIVATIVES, METAL FUMES (LEAD, ANTIMONY, ETC).

Waste Disposal Methods:RETURN FOR REPROCESSING. DISPOSAL MUST BE IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.

SARA Title III Information:THIS PRODUCT CONTAINS A CHEMICAL SUBJECT TO
SECTION 313 OF SARA TITLE III.
State Regulatory Information:THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO
THE STATE OF CALIFORNIA TO CASUE CANCER, OR BIRTH DEFECTS OR
REPRODUCTIVE HARM.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.